Starting applications, Starting fiery command workstation, Starting applications -16 – Konica Minolta bizhub PRESS C1070 User Manual
Page 44: Starting fiery command workstation -16
3-16
3.2
Installing Applications
F
When the installation has been
completed, click [Close].
Installation is completed.
Starting applications
)
Starting Fiery Command WorkStation
To start Fiery Command WorkStation, first perform the login procedure.
A
Start Fiery Command WorkStation.
-
In Windows 7/Windows Vista/Windows Server 2008 R2/Windows Server 2008/Windows Server
2003/Windows Server 2003 R2, open the Start menu, then click [All Programs] - [Fiery] - [Fiery
Command WorkStation 5].
-
In Windows 8/Windows Server 2012, click [Fiery Command WorkStation 5] on the Start screen.
-
In Macintosh, select [Go] menu - [Applications] - [Fiery] - [Command WorkStation 5], then double-
click [Command WorkStation].
B
Select a Fiery to be connected, then
click [Add].
You can also specify any subnetwork or the IP
address range to search for the desired Fiery. For
details, refer to the User's Guide supplied with
the Fiery Color Server.