Konica Minolta bizhub PRESS C1070 - Manual (Page 67)

5-9
bizhub PRO C1060L
bizhub PRESS C1070/C1070P/C1060
5
H
Measure the line length at each of points
[1] to [8] on the printed-out chart using a
scale.
- The figure on the right illustrates an example
to measure points [1] and [5]. As illustrated in
this example, measure the line length at each
printed point.
- The measurement value can be entered in
units of up to 0.1 mm.
- Write down the measured lengths so that you
do not forget them.
I
Press each point number, then enter the measured length using the keypad, [,], or
[+] on the screen.
- To reset a value, press [Clear].
[ 1 ]
[ 5 ] [ 7 ]
[ 6 ] [ 8 ]
[ 2 ]
[ 3 ] [ 4 ]
[ 1 ]
[ 5 ]