Konica Minolta bizhub PRESS C1070 - Manual (Page 14)

1-2
1.1 Turning the Power ON/OFF
C
Turn the image controller on.
- For Image Controller IC-415, turn the power switch in the
rear side on ( ), then press the button on the top of the
power switch ( ).
- For Image Controller IC-308, turn the power switch in the
rear side on (
), then press the power button in the front
side ( ).
NOTICE
NOTICE
After this machine has started completely, turn the image controller on.
Tips
If [Machine is warming up] is displayed on the [MACHINE] screen, it indicates that this machine is in the warm-up state.
Warm-up processing takes approximately 6.5 minutes.
ON
OFF
ON
OFF