beautypg.com

Konica Minolta bizhub PRESS C1070 User Manual

Page 70

background image

5-12

5.1

Both Sides Adjustment

P

Press [X] or [Y] at each point, and enter the measured numeric value using the keypad,
[,], or [+] on the screen.

-

If the printing position is misaligned to the minus (-) side, enter a positive value (+). If the printing
position is misaligned to the plus (+) side, enter a negative value (-).

-

To reset a value, press [Clear].

-

To switch the positive sign (+) and negative sign (-), press [+/-].

Q

When entry processing is completed,
press [Adjustment Start].

R

After the adjustment is completed, press
[OK].

To finely adjust the adjustment value,
continuously proceed to step 4 in "Zoom and
Image Shift Adjustment" (page 5-14).

This manual is related to the following products: