Konica Minolta bizhub PRESS C1070 - Manual (Page 75)

5-17
bizhub PRO C1060L
bizhub PRESS C1070/C1070P/C1060
5
5.2 Image Quality Adjustment
Image Quality adjustment
Adjust the color image quality at periodic intervals to maintain consistent printing results against a change in ambient
temperature or humidity, a change of this machine conditions, or a change of the color tone due to the paper type or
print mode.
This machine provides the following two methods to adjust image quality.
) To manage the daily image quality
Carry out the density adjustment that is typically referred to as calibration.
Two methods are available: To use an optional Relay Unit RU-509 and to use a colorimeter and Fiery Command
WorkStation that is the software supplied with the image controller. For details, refer to page 5-18.
) To specify the reference image quality
Execute this method at the time of installation or when changing conditions such as the screen.
If you use this application when you cannot obtain the stable image quality after calibration, the image quality may be
enhanced. For details, refer to page 5-31.
Using Relay Unit RU-509 Using Fiery Command WorkStation