Konica Minolta bizhub PRESS C1070 User Manual
Page 115
7-9
bizhub PRO C1060L
bizhub PRESS C1070/C1070P/C1060
7
B
Check the user name.
-
For Image Controller IC-415 or Image Controller IC-308, "computer name (or domain name)\user
name" is required.
-
In Windows Vista/Windows 7/Windows Server 2003/Windows Server 2003 R2/Windows Server
2008/Windows Server 2008 R2, select [All Programs] - [Accessories] and open [Command Prompt].
Then, type in "set user" and press the [Enter] key.
-
In Windows 8/Windows Server 2012, right-click the Start window, click [All apps], and open
[Command Prompt]. Then, type in "set user", and press the [Enter] key. Then, type in "set user", and
press the [Enter] key.
-
The domain name and user name are displayed. The login user name is shown following
"USERNAME=".
-
The user name is required to specify a destination. Write down the user name so that you do not
forget it.
C
Enable file sharing.
-
Windows 7/Windows 8/Windows Server 2008 R2/Windows Server 2012, select [Control Panel] -
[Network and Internet] - [Network and Sharing Center] - [Advanced sharing settings], then click [Turn
on file and printer sharing] in the [Change advanced sharing settings] window.
-
In Windows Vista, select [Control Panel] - [Network and Internet] - [Network and Sharing Center],
then click [Sharing and Discovery] - [File Sharing] - [Turn on file sharing].
-
In Windows Server 2008, click [Control Panel] - [Network and Internet] - [Set up file sharing], select
[Sharing and Discovery] - [File Sharing] in the [Network and Sharing Center] window, then click [Turn
on file sharing].
-
In Windows Server 2003/Windows Server 2008 R2, open [Tools] - [Folder Options] in the folder, then
clear the [Use simple file sharing (Recommended)] check box on the [View] tab.
D
Set to a shared folder.
Right-click the folder to be shared, open [Properties], then click [Advanced Sharing] in the [Sharing] tab.
On the opened window, select the [Share this folder] check box.
E
Set [Permissions].
Click [Permissions] on the [Advanced Sharing]
window, select [Group or user names] -
[Everyone], then set [Change] of Permissions to
Allow.