Konica Minolta bizhub PRESS C1070 - Manual (Page 17)

1-5
bizhub PRO C1060L
1
bizhub PRESS C1070/C1070P/C1060
H
After the system has quit, turn the sub power
switch off.
The touch panel display goes off, and the Power LED on the
control panel is changed from green to red.
I
Turn off the main power switch.
NOTICE
NOTICE
When turning the main power switch off then on, be sure to wait for 10
seconds or longer before turning the main power switch on again. If the
main power switch is turned on again within 10 seconds, the machine
may not function normally.
J
Turn the power switch in the rear side off.
NOTICE
NOTICE
After this machine has exited completely, turn Image Controller IC-
415 off.
OFF
ON
ON OFF
ON
OFF