Konica Minolta bizhub PRESS C1070 - Manual (Page 101)

6-9
bizhub PRO C1060L
bizhub PRESS C1070/C1070P/C1060
6
D
Remove all jammed paper, then press
[Close].
This returns to the [MACHINE] screen.
Tips
If the paper jam message does not been yet clear even after all the jammed paper has been removed, the paper jam
may have occurred in a place other than the one displayed. Check other places not displayed on the touch panel again.
In particular, check the following points.
- Check whether a slip of paper is left on the back of the part indicated by the number on the touch panel. If you cannot
smoothly remove jammed paper, do not remove it forcibly. Contact your service representative.
- Open and close the door of the part indicated by the number on the touch panel again. This operation may clear the
message.
If the paper jam message still have not been cleared after checking the above, contact your service representative.