Konica Minolta bizhub PRESS C1070 - Manual (Page 65)

5-7
bizhub PRO C1060L
bizhub PRESS C1070/C1070P/C1060
5
) Chart Adjustment
You can print out a Both Sides Adjustment chart, measure measurement points using a scale, and enter measurement
values in order to carry out the adjustment.
Using this function, you can only enter measurement values to carry out the both-side adjustment. This is convenient
when an unclear misalignment is detected between the front and back sides to perform the duplex printing with a new
type of paper or to change paper in a tray.
A
Press [Paper Setting] on the [MACHINE]
screen.
B
Select the tray with the target paper
loaded, then press [Change Set].
C
Press [Both Sides Adj].