Konica Minolta Bizhub 215 - Manual (Page 68)

bizhub 215 4-28
4.3 Administrator mode 4
When [SMB] is selected:
[Remote Port Number] Specify the port number (1 to 65535) of the remote host when you
do not use the proxy server. Normally, use port number 21.
[Enable Notification] Select this check box to send a E-mail notification when uploading
scan data to the FTP server.
[Notification Address] Specify the E-mail address of the destination (up to 10 destina-
tions) for sending E-mail notification (using up to 64 single-byte
characters).
[Anonymous] Select this option when the destination FTP site is an anonymous
FTP server.
[Private Site] Select this option when the destination FTP site requires user au-
thentication, and specify the following items.
User Name: User name used to log in to the FTP site (using up to
20 single-byte characters).
Password: Password for the user name used to log in to the FTP
site (using up to 20 single-byte characters).
Confirm: Enter the same password for confirmation.
Item Description
Item Description
[Destination Name] Enter a destination name (using up to 20 single-byte characters).
This is the name to be displayed on the Control Panel.
[Destination Address] Specify the SMB server, or the computer name or IP address of the
shared computer to send scan data (using up to 64 single-byte
characters).
[Directory] Specify the SMB server, or the shared folder of the shared compu-
ter to send scan data (using up to 128 single-byte characters).
[Enable Notification] Select this check box to send a E-mail notification when uploading
scan data to the SMB server or a shared computer.
[Notification Address] Specify the E-mail address of the destination (up to 10 destina-
tions) for sending E-mail notification (using up to 64 single-byte
characters).
[Anonymous] Select this option when the destination shared folder does not re-
quire user authentication.
[Private Site] Select this option when the destination shared folder requires user
authentication, and specify the following items.
User Name: User name used to access to the shared folder (using
up to 20 single-byte characters).
Password: Password for the user name used to access to the
shared folder (using up to 20 single-byte characters).
Confirm: Enter the same password for confirmation.