Konica Minolta Bizhub 215 - Manual (Page 19)

bizhub 215 3-8
3.2 Configuration via the Control Panel 3
3.2 Configuration via the Control Panel
You can configure Network Settings via the Control Panel. To configure Network Settings via the Control
Panel, press the Utility key to use menus displayed under [ADMIN. MANAGEMENT] in [Utility].
Network-related items that can be configured under [ADMIN. MANAGEMENT] are listed below.
Menu Sub-menu Settings
[NETWORK SETTING] [IP ADDRESS SETTING] [AUTO/SPECIFY] *1
[IPv6] [DISABLE/ENABLE]
[AUTO SETTING]
[LINK LOCAL]
[GLOBAL ADDRESS]
[PREFIXED LENGTH]
[GATEWAY ADDRESS]
[DNS CONFIG.] [DISABLE/ENABLE]
[WEB SETTING] [DISABLE/ENABLE]
[LPD SETTING] [DISABLE/ENABLE]
[SLP SETTING] [DISABLE/ENABLE]
[SNMP SETTING] [DISABLE/ENABLE]
[AUTO GET TIME] -
[E-MAIL SETTING 1] [SENDER NAME] -
[E-MAIL ADDRESS] -
[SMTP SERVER ADDR.] -
[SMTP PORT NO.] [1-65535]
[SMTP TIMEOUT] [30-300sec]
[TEXT INSERT] [OFF/ON]
[DEFAULT SUBJECT] -
[POP BEFORE SMTP] [OFF/ON (0-60sec)]
[E-MAIL MODE] *2 [BASIC/ADVANCED]
[E-MAIL SETTING 2] [POP3 SERVER ADDR.] -
[POP3 PORT NO.] [1-65535]
[POP3 TIMEOUT] [30-300sec]
[POP3 ACCOUNT] -
[POP3 PASSWORD] -
[AUTO RECEPTION]
*2
[OFF/ON]
[REPLY ADDRESS]
*2
-
[HEADER PRINT] *2 [OFF/ON]