Konica Minolta Bizhub 215 - Manual (Page 23)

bizhub 215 3-12
3.4 Network Settings 3
11
On the Control Panel, press the Reset key.
% When the following screen appears, turn the power on and off to restart the machine in order to en-
able the settings.
3.4.2 Configuring IPv6
1
Press +, to select [IPv6], then press OK.
2
Press +, to select [DISABLE/ENABLE], then press OK.
3
Press +, to select [DISABLE] or [ENABLE], then press OK.
If [DISABLE] is selected, [ACCEPTED] appears and the screen returns to the IPv6 Settings screen.
% IPv6 is now disabled and so no settings appear subsequently. Select [RETURN] and press OK to
return to the Network Settings screen. If [ENABLE] is selected, [ACCEPTED] appears and the screen
returns to the IPv6 Settings screen.
% Proceed with configuration of the remaining settings for IPv6.
Tips
- If you have selected [ENABLE], configure the following settings as needed.
– AUTO SETTING (page 3-12)
– LINK LOCAL (page 3-13)
– GLOBAL ADDRESS (page 3-13)
– PREFIXED LENGTH (page 3-13)
– GATEWAY ADDRESS (page 3-14)
Automatically obtaining the IPv6 address
1
Press +, to select [AUTO SETTING], then press OK.
2
Press +, to select [OFF] or [ON], then press OK.
If [OFF] is selected, [ACCEPTED] appears and the screen returns to the IPv6 Settings screen.
% As the IPv6 address is not automatically obtained, you need to configure the remaining settings
manually.
If [ON] is selected, the screen returns to the IPv6 Settings screen.