Konica Minolta Bizhub 215 - Manual (Page 65)

bizhub 215 4-25
4.3 Administrator mode 4
When [Fax] is selected:
Tips
- You can select [Fax] only for models in which the Fax kit FK-510 is installed.
When [E-mail] or [LDAP Search] is selected:
Tips
- The item with "*1" is available only for models in which the FAX Kit FK-510 is installed.
- The setting of the item with "*1" is available only if the data is sent according to the transmission pro-
cedure of Internet fax. The setting is not enabled if the data is sent according to the transmission pro-
cedure of Scan to E-mail. For details on the Internet fax, refer to [User's Guide Fax Operations].
When [Group Dial] is selected:
You can register a group dial using the same procedure as [Group Dial Setting] in the [Address] tab. For de-
tails, refer to page 4-29.
Item Description
[Destination Name] Enter a destination name (using up to 20 single-byte characters).
This is the name to be displayed on the Control Panel.
[Destination Number] Enter a destination fax number (using up to 30 single-byte charac-
ters).
[F-CODE - SUB address] Enter an F code SUB address (using up to 20 single-byte charac-
ters).
[F-CODE - Password] Enter an F code password (using up to 20 single-byte characters).
[Transmission Speed] Select a transmission speed.
[Batch Time] Enter a time for batch transmission.
Item Description
[Destination Name] Enter a destination name (using up to 20 single-byte characters).
This is the name to be displayed on the Control Panel. If the ad-
dress is selected using [LDAP Search], the item is already entered.
[Destination Address] Enter the E-mail address of the destination (using up to 64 single-
byte characters). If the address is selected using [LDAP Search],
the item is already entered.
[Basic Mode/Advaced Mode]
*
1 Specify the mail mode (basic mode, advaced mode) used for send-
ing an Internet fax.
[Max TX Size] * 1 Specify the upper limit of transmission size for sending in the ad-
vaced mode.
[Max Resolution]
*
1 Specify the upper limit of transmission image quality for sending in
the advaced mode.
[Coding Mode]
*
1 Specify the upper limit of compression coding system for sending
scan data in the advaced mode.