Konica Minolta NC-503 - Manual (Page 94)

Registering destinations 5
NC-503 5-5
2
Press the [,] or [+] key until “DIAL REGISTRATION” is selected, and
then press the [OK] key.
3
Press the [,] or [+] key until “SPEED DIAL” is selected, and then press
the [OK] key.
4
Type in the speed dial number to be programmed, and then press [OK]
key.
– Speed dial numbers 001 through 240 can be programmed from the
control panel.
The speed dial number to be programmed appears, and then the
screen for registering settings appears.