Konica Minolta NC-503 - Manual (Page 127)

6 Performing a Scan to E-mail operation
6-20 NC-503
2
Press the [Quality] key.
3
Press the [,] or [+] key until “RESOLUTION” is selected, and then
press the [OK] key.
4
Press the [,] or [+] key to select the appropriate resolution.
– The settings available for the resolution are “150×150dpi”,
“300×300dpi” and “600×600dpi”.
– The manufacturer’s default setting is “300×300dpi”.
5
Press the [OK] key.
After the message “ACCEPTED” appears, the Scan mode screen ap-
pears again.