Konica Minolta NC-503 - Manual (Page 171)

8 Using PageScope Web Connection
8-6 NC-503
2
Note
The Print tab appears only if optional image controller IC-206 is installed.
The PageScope Web Connection pages appear differently depending on
the options installed on the machine and the specified machine settings.
Operation
In PageScope Web Connection, click a tab, select a function category, and
then click an item in the menu to display the available parameters.
For items that can only be viewed, check them in the Information and set-
tings pane.
For items where settings can be changed, change the settings in the Infor-
mation and settings pane.
The basic operation for changing settings consists of clicking a tab, selecting
the desired settings, then clicking the [Apply] button. Since the procedure for
changing the settings may differ depending on the parameter, refer to the
page containing the corresponding description for the parameter.
PageScope Web Connection is used in the same way that Internet Web pag-
es are viewed. Click page links to display those pages, or click the [Back] (or
[Forward]) button in the toolbar to display the previous (or next) page.
Web browser cache
The most recent information may not appear in the PageScope Web Con-
nection pages because older versions of pages are saved in the cache for
the Web browser. In addition, problems may occur when the cache is used.
When using PageScope Web Connection, disable the cache for the Web
browser.
4 Tabs Click to select the desired category of settings. The fol-
lowing tabs appear in User mode.
System
Job
Print
Scan
Network
5 Menu Information and settings for the selected tab are listed.
The menu that appears differs depending on the tab
that is selected.
6 Information and settings Details of the item selected from the menu are dis-
played.
7 “Admin Password” box Type in the password to log on to the Administrator
mode.
No. Item Description