Konica Minolta NC-503 - Manual (Page 71)

4 Network settings
4-20 NC-503
5
In the “E-MAIL SETTING 1” menu, press the [,] or [+] key until “SEND-
ER NAME” is selected, and then press the [OK] key.
6
Type in the sender’s name.
– The sender’s name can contain a maximum of 20 characters.
7
Press the [OK] key.
After the message “ACCEPTED” appears, the “E-MAIL SETTING 1”
menu appears again.
2
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.