Konica Minolta NC-503 - Manual (Page 62)

Network settings 4
NC-503 4-11
11
Press the [Reset] key in the control panel.
– After the screen shown below appears, turn the machine off, then
on again to restart it.
2
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.
2
Reminder
In order to apply the new settings, the machine must be turned off, then
on again to be restarted.
Specifying the DNS settings
1
In the “NETWORK SETTING” menu, press the [,] or [+] key until “DNS
CONFIG.” is selected, and then press the [OK] key.