Konica Minolta NC-503 User Manual

Page 229

Using PageScope Web Connection

8-64

NC-503

Reminder

To change the settings on the Network tab, click the [Apply] button, and
then, after “Updated Successful” appears, click the [Reset] button on the
page that appears after clicking “NIC and Printer Controller Reset” in the
menu under “Maintenance” on the System tab; otherwise, the changes
to the settings will not be applied.

After changing the settings for parameters marked with an asterisk (*),
turn this machine off, then on again.

The NetWare information that can be specified differs as shown below, de-
pending on the emulation mode and service mode settings selected for Net-
Ware.

Preferred NDS
Tree

Type in the preferred NDS tree name. (maximum 63 characters, excluding
/ \ ; : , * [ ] < > | + = ? and .)

Print Queue Scan
Rate(*)

Specify the interval for scanning the print queue. (Range: 1 to 65535 sec-
onds)

Mode(*)

Select either “PServer” or “Nprinter/Rprinter” as the operating mode for
the print server.

Printer Number

Type in the Nprinter/Rprinter printer number. (Range: 0 to 254)

Connection Mode

Specify the NetWare emulation mode. (“Directory Services (NDS)”, “Bind-
ery” and “Directory Services/Bindery”)

Item

Description

Service mode

Nprinter

PServer

Emulation mode

NDS

Bindery

NDS

Bindery

NetWare Configuration

Enable NetWare (Select the
check box.)

Frame Type

AutoDetect (Select the frame
type according to the network
environment.)

Print Server Name

Print server name specified on
the NetWare server

NDS Context Name

Name of the
context that
connects to
PServer

Not necessary
to specify

Name of the
context that
connects to
PServer

Not necessary
to specify

Print Server Password

Specify only when setting from
the NetWare server.

Password Retype

Preferred File Server

Not necessary
to specify

Name of the
file server that
connects to
PServer

Not necessary
to specify

Name of the
file server that
connects to
PServer

This manual is related to the following products:

bizhub 181