Konica Minolta NC-503 - Manual (Page 85)

4 Network settings
4-34 NC-503
3
Type in the administrator access code, and then press the [OK] key.
– For the administrator access code, consult with the network admin-
istrator. The manufacturer’s default setting is “000000”.
– If the code was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
4
Press the [,] or [+] key until “USER SETTING” is selected, and then
press the [OK] key.
5
In the “USER SETTING” menu, press the [,] or [+] key until “NTP
SERVER ADDRESS” is selected, and then press the [OK] key.