Konica Minolta NC-503 - Manual (Page 80)

Network settings 4
NC-503 4-29
6
Type in the IP address or host name for the POP3 server.
– The host name can contain a maximum of 64 characters.
– To specify a host name for the POP3 server, the DNS setting must
be specified.
– For the IP address or host name of the POP3 server, consult with
the network administrator.
7
Press the [OK] key.
After the message “ACCEPTED” appears, the “E-MAIL SETTING 2”
menu appears again.
2
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.
Specifying the POP3 port number
1
In the “E-MAIL SETTING 2” menu, press the [,] or [+] key until “POP3
PORT NO.” is selected, and then press the [OK] key.