Konica Minolta NC-503 User Manual

Page 159

Performing a Scan to Server (FTP) operation

7-6

NC-503

–

Align the document on the scales above and to the left of the orig-
inal glass.

–

For information on documents that can be used and the scanning
area of the image, refer to the User’s Guide included with the ma-
chine.

Press the [Speed Dial] key, and then use the keypad to type in the 3-
digit speed dial number (number programmed with the address of the
FTP server where the data is to be uploaded).

–

When the destination address is entered, “OTHER SETTING=,”
appears. To change the transmission settings, such as the subject,
cc address or file format, press the [,] key. The “SCAN OTHER
SETTING” menu appears. For details on changing the transmission
settings, refer to “Changing the transmission settings” on
page 6-10.

–

Specify a speed dial number between 241 and 250.

–

If nothing is registered with the specified speed dial number, an er-
ror message appears. Enter the correct speed dial number.

–

If the number was incorrectly entered, press the [Back] key, and
then type it in correctly.

This manual is related to the following products:

bizhub 181