Konica Minolta NC-503 - Manual (Page 90)

Registering destinations 5
NC-503 5-1
5 Registering destinations
This chapter provides descriptions of the procedures for registering destina-
tion addresses.
5.1 Registering destinations
Destinations can be registered from the machine’s control panel or from Pa-
geScope Web Connection. The following procedures describe how to regis-
ter destinations from the machine’s control panel.
!
Detail
For details on registering destinations from PageScope Web Connection,
refer to “Using PageScope Web Connection” on page 8-1.
Operation E-mail address des-
tination Description Machine con-
trol panel PageScope
Web Connec-
tion
o: Can be set; -: Cannot be set
Scan to E-
mail One-touch dial keys
(Available only if fax
kit FK-506 is installed) Press a one-touch
dial key to easily
specify the destina-
tion. o o
Scan to E-
mail Speed dial numbers A destination can be
specified by entering
the 3-digit speed dial
number. o o
Scan to E-
mail Group dial keys
(Available only if fax
kit FK-506 is installed) The transmission can
be sent to multiple
destination at the
same time by using a
single one-touch dial
key. o o
Scan to
Server
(FTP) Speed dial numbers
(registered with an
FTP server address) Data can be uploaded
to an FTP site. - o