Konica Minolta BIZHUB 223 - Manual (Page 150)

bizhub 423/363/283/223 7-18
7.1 [System Settings] 7
d
Reference
To configure user authentication/account track:
Press the Utility/Counter key ö [Administrator Settings] ö [User Authentication/Account Track] ö [General
Settings].
7.1.10 [User Box Settings]
This setting is for the User Box functions. For details, refer to the [User's Guide Box Operations].
7.1.11 [Standard Size Setting]
Configure settings relating to the capability for detecting original size and the foolscap paper sizes.
For details on displaying this item, contact your service representative.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Standard Size Set-
ting].
[Job Reset] [When Account is
changed] Configure whether to reset the settings when you
log off if the user authentication or account track
settings have been configured.
[When original is set
on ADF] Configure whether to reset the settings when an
original is loaded in the ADF.
[Next Job] Configure whether to reset the following settings
when the next job is selected.
•
[Staple Setting]
• [Original Set/Bind Direction]
• [Reset Data After Job]
The destination of data is always reset.
Factory default
[Priority Mode] [Copy]
[System Auto Reset Time] 1 minute
[Auto Reset] • [Copy]: 1 Minute
• [Fax/Scan]: 1 Minute
• [User Box]: 1 Minute
[When Account is changed] [Reset]
[When original is set on
ADF] [Do Not Reset]
[Next Job] • [Staple Setting]: [OFF]
• [Original Set/Bind Direction]: [OFF]
• [Reset Data After Job]: [Reset All]
Settings