Konica Minolta PageScope Enterprise Suite - Manual (Page 22)

My Panel Manager operations 3
My Panel Manager 3-8
Image Select an image. To use a supplied icon, select [Specify
Icon], and then select an icon. To use any other image, se-
lect [Specify Image], and then click the [Browse] button to
specify the image file (24-bit BMP (Bitmap) file of 48 x 48
pixels).
2
Reminder
To change the image registered in the address
book, select [Edit], and then specify the image
file.
Destination (Fax Number) Type in the destination of a fax (fax number).
SIP-Fax Select to enable or disable SIP-Fax Transmission.
Machine Type of Destination Select [Color] when the destination is a color device, or se-
lect [Black and White] when the destination is a black-and-
white device.
2
Reminder
This function can only be set when SIP-Fax
Transmission is enabled.
Check Dest. & Send Select to enable or disable Check Dest. & Send.
2
Reminder
This function can only be set when SIP-Fax
Transmission is disabled.
Select Line Select the line to be used. Selecting [Overseas TX] enables
the Overseas TX mode. Selecting [ECM OFF] disables the
ECM mode. Selecting [V34 OFF] disables the V34 mode.
2
Reminder
This function can only be set when SIP-Fax
Transmission is disabled.
The ECM and V34 modes cannot be disabled at
the same time.
[Select All/Uncheck all] button Selects all groups displayed in the Group List. Clicking this
button again cancels all selections.
Group List Displays a list of groups registered in My Address. Select
the check box, and then select the group where the ad-
dress book currently specified is registered.
[Apply] button Registers the address book with the specified settings.
[Clear] button Clears the specified settings and reverts to the initial set-
tings.
Function Details