Konica Minolta bizhub 282 - Manual (Page 93)

4 Routing documents
4-2 362/282/222
Routing doc
u
ments
Chapter 4
4 Routing documents
4.1 Routing
By touching [Route] in a box selected with the Retrieve from HDD operation,
a saved document can be sent through the network. In this way, data can
easily be routed simply by registering with this machine a server or e-mail ad-
dress instead of by sending the data through different computers.
!
Detail
Documents scanned and saved (Scan to HDD) with an older version of
the firmware cannot be routed.
Routing methods
Document data saved in boxes can be routed using the following operations.
2
Note
Instead of registering a routing destination as a one-touch recipient, it
can be registered with a program.
For details on programming a one-touch dial button with settings for an
e-mail transmission or a transmission to an FTP server or SMB server, re-
fer to the User’s Guide [Network Scanner Operations].
For details on programming a one-touch dial button for a Scan to PC op-
eration, refer to the User’s Guide [Advanced Scan Operations].
The Scan to PC operation can be used if the optional scanner unit or fax
kit is installed.
Operation Details
E-mail transmis-
sion Data is sent as an e-mail attachment to the registered e-mail address. Reg-
ister the destination as a one-touch recipient in advance or type in the ad-
dress directly.
Scan to PC Data is sent to a folder on a registered computer. Register the destination
as a one-touch recipient in advance.
FTP transmission Data is sent to a registered FTP server. Register the destination as a one-
touch recipient in advance.
SMB transmission Data is sent to a computer on a registered network. Register the destina-
tion as a one-touch recipient in advance.
362.book 2 ページ ２００８年１０月２０日 月曜日 午前１１時３２分