Konica Minolta bizhub 282 - Manual (Page 16)

Introduction
362/282/222 x-15
User’s Guides
The following User’s Guides have been prepared for this machine.
User’s Guide [Copy Operations]
This manual contains details on basic operations and the operating proce-
dures for the various copy functions.
-
Refer to this User’s Guide for details on operating procedures for copy
functions, including precautions on installation/use, turning the machine
on/off, loading paper, and troubleshooting operations such as clearing
paper misfeeds.
User’s Guide [Network Scanner Operations]
This manual contains details on specifying network functions for standard
equipment and on operations for scanning functions.
-
Refer to this User’s Guide for details on operating procedures for network
functions and for using the Scan to E-Mail, Scan to FTP, Scan to SMB
and Internet fax operations.
User’s Guide [Box Operations] (this manual)
This manual contains details on operating procedures for using the Box func-
tions.
-
Refer to this User’s Guide for details on printing a proof copy or a locked
job and on functions that use the optional hard disk drive, such as routing
and saving documents in boxes.
User’s Guide [Print Operations]
This manual contains details on operating procedures using the standard
built-in printer controller.
-
For details on the printing functions, refer to User’s Guide (PDF file) on
User Software CD-ROM.
Quick Guide [Print Operations]
This manual contains details on operating procedures using the standard
built-in printer controller.
-
Refer to this Quick Guide for basic operating procedures on the printing
functions.
User’s Guide [Advanced Scan Operations]
This manual contains details on the operating procedures for the functions
that can be used when the optional scanner unit is installed.
-
Refer to this User’s Guide for details on using the IP address faxing, IP
Relay and Scan to PC operations and on using IP Scanner.
362.book 15 ページ ２００８年１０月２０日 月曜日 午前１１時３２分