4 managing data saved on the hard disk, Deleting all data, Managing data saved on the hard disk -12 – Konica Minolta bizhub 282 User Manual
Page 119: Deleting all data -12
5
Control Panel Settings
5-12
362/282/222
Control Panel Settings
Chap
te
r 5
5.4
Managing data saved on the hard disk
Data saved on the hard disk can be deleted and a locking password can be
specified.
Deleting all data
All data saved on the hard disk can be deleted.
0 If the “Overwrite All Data” parameter is selected, all programmed and
specified settings are reset to their defaults, and all data saved on the
hard disk is erased. Since the machine may not operate correctly after all
data is erased, perform this operation when disposing of the machine. Do
not perform this operation in any other circumstances.
0 About 35 hours is required to completely delete all data.
0 Wait at least two minutes after turning on the machine before deleting all
of the data.
1
Press the [Utility/Counter] key.
2
Touch [Admin. Management].
3
Type in the administrator code, and then touch [Enter].
4
Touch [Admin. 2], and then touch [HDD Management].
Utility/Counter
Administrator Management 2
Printer
Setting
Software SW
Network
Settings
Ping
Enter
Security
Setting
Delete Job
HDD
Management
362.book 12 ページ 2008年10月20日 月曜日 午前11時32分