Konica Minolta bizhub 421 - Manual (Page 36)

Fax Driver 3-5
Setting up the fax driver (Windows) 3
3.1.3 Specifying the transmission settings
When sending a fax, you can specify the transmission settings in the Fax Mode Details dialog box that
appears when the [Fax Mode Setting Details] button is clicked in the FAX Transmission Popup dialog box.
Print Recipient File: Prints the document after a fax was sent.
Timer Send: Sets the transmission time. By clicking the [Reflect Current Time] button, the current time set on
the computer is displayed in the "Send Time" boxes.
SUB Address: Specifies the sub address for sending confidential faxes using F-codes.
Sender ID: Specifies the sender ID for sending confidential faxes using F-codes.
2
Note
When using Timer Send, check that the time set on the computer is synchronized with the time on this
machine. If the transmission time is earlier than the current time of this machine, the fax is sent the next
day.
If sending confidential faxes using F-codes to another fax model, enter the sub address and sender ID
in the "SUB Address" and the "Sender ID" text boxes. Up to 20 characters (numbers 0 through 9) can
be entered in the "Sub Address" text box. Up to 20 characters (numbers 0 through 9, #, and *) can be
entered in the "Sender ID" text box. For the details on the sub address and the sender ID, refer to the
User’s Guide [Network Scan/Fax/Network Fax Operations].
3.1.4 Creating a fax cover sheet
When sending a fax, you can attach a cover sheet to the fax message by selecting the "FAX Cover Sheet"
check box in the FAX Transmission Popup dialog box. You can edit the cover sheets from the FAX Cover
Sheet Settings dialog box that appears by clicking the [Settings] button in the Fax Transmission Popup dialog
box.
In the FAX Cover Sheet Settings dialog box, you can change the settings on the Basic, Recipient, Sender, or
Image tab by switching between each screen.
2
Note
For Windows Vista/7/Server 2008 64bit editions, the "FAX Cover Sheet" check box cannot be selected
from the FAX Transmission Popup dialog box. It must be specified in the Print settings for the fax driver
in advance. In addition, "FAX Cover Sheet" cannot be selected with any of the following functions at
the same time.
- [User Authentication]
- [Account Track]
- [Verify Authentication settings before printing]
- [Popup Authentication Dialog when printing]
1
Select the "FAX Cover Sheet" check box in the FAX Transmission Popup dialog box.