Lenovo ThinkServer RD540 - Manual (Page 95)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 77
To run user diagnostics in the CLI:
Use QConvergeConsole CLI (qaucli), a unified command line utility, to manage all QLogic adapter
models, including running user diagnostics. The overall option (-pr <protocol>) allows you to start the
utility with a specific protocol type: NIC, iSCSI, or Fibre Channel. If you do not specify a protocol, all
protocols are enabled by default. Table 11 and Table 12 list the QConvergeConsole commands for
selecting a protocol.
Diagnostic help commands, and command options available for each specific protocol, are available by
specifying -h to the protocol, as shown in Table 13.
Table 11. Windows QConvergeConsole CLI—Selecting a Protocol in Menu Mode
Command Description
qaucli Start QConvergeConsole CLI in interactive mode
qaucli -pr nic [options] Issue NIC command line options
qaucli -pr iscsi [options] Issue iSCSI command line options
qaucli -pr fc [options] Issue Fibre Channel and FCoE command line
options
qaucli -npar [options] Issue NPAR command line options
Table 12. Windows QConvergeConsole CLI—Selecting a Protocol in Legacy Mode
Command Description
qaucli -nic [options] Use NIC legacy command line
netscli [options] Use NIC legacy command line
qaucli iscsi [options] Use iSCSI legacy command line
iscli [options] Use iSCSI legacy command line
qaucli -fc [options] Use Fibre Channel legacy command line
scli [options] Use Fibre Channel legacy command line
Table 13. Windows QConvergeConsole CLI—Getting Help
Command Description
-h Print usage of a specific adapter type, and then exit
qaucli -pr nic -h Print NIC protocol usage, and then exit
qaucli -pr fc -h Print Fibre Channel and FCoE protocol usage, and then exit
qaucli -pr iscsi -h Print iSCSI protocol usage, and then exit
qaucli -npar -h Print NPAR commands usage, and then exit