Lenovo ThinkServer RD540 - Manual (Page 103)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 85
Chapter 3. Configuring iSCSI
iSCSI Overview
This chapter describes the driver and agent installation, configuration, operation, and troubleshooting of
the iSCSI function of the 8200 Series Converged Network Adapter.
Installing iSCSI in Linux
For information about packaging content, Linux OS support, supported features, driver deployment, and
driver system parameters, refer to the iSCSI Adapter Inbox Driver Update Readme file on the QLogic Web
site http://driverdownloads.qlogic.com.
Installing iSCSI in ESX
For information about packaging content, ESX OS support, using the driver, and installing the driver, refer
to the iSCSI Adapter Driver and IMA Plug-in for VMware ESX/ESXi 4.1.x Readme file on the QLogic Web
site http://driverdownloads.qlogic.com.
Installing iSCSI in Windows
For information about packaging content, Windows OS support, and using the driver, refer to the iSCSI
Adapter STOR Miniport Driver for Windows Readme file on the QLogic Web site
http://driverdownloads.qlogic.com.
iSCSI Configuration
iSCSI Configuration with QCC GUI
For information about iSCSI configuration with QCC GUI, refer to the QConvergeConsole Help System for
information.
iSCSI Configuration with Interactive QCC CLI
For information about iSCSI configuration with the interactive QCC CLI, refer to the QConvergeConsole
CLI User's Guide for information on the QLogic Web site http://driverdownloads.qlogic.com.
iSCSI Configuration with Non-Interactive CLI
For information about iSCSI configuration with the non-interactive CLI, refer to the QConvergeConsole CLI
User's Guide, “iSCSI Noninteractive Commands” section on the QLogic Web site
http://driverdownloads.qlogic.com.
iSCSI Initiator
Configuring an iSCSI Initiator in Linux
Use QConvergeConsole CLI to configure the iSCSI initiator for Linux.
To configure a Linux iSCSI initiator:
1. Access the QConvergeConsole CLI by entering qaucli in a terminal window.
2. On the QConvergeConsole CLI Main Menu, select 2, Adapter Configuration.