Kodak ESP 7 - Manual (Page 68)

Maintaining Your Printer
60 www.kodak.com/go/aiosupport
NOTE: Listen carefully during this step; make sure you hear the ink cartridges click
into place in the printhead. This seats the cartridges properly, and prevents
ink from being dispensed incompletely during your print or copy jobs.
9. Close the printer access door. The printhead moves to its ready position and
prepares the new ink cartridge for use (this could take up to a minute).
Replacing the printhead
If your printhead is damaged or broken, you may replace it yourself.
1. Make sure your printer is turned on.
2. Open the printer access door by lifting from the recessed hand-holds on the
sides of the unit.
The printhead moves to an accessible position for handling the ink cartridges.
The ink cartridges are seated in the printhead.