Kodak ESP 7 - Manual (Page 65)

www.kodak.com/go/aiosupport 57
KODAK ESP 7 All-in-One Printer
Maintenance options
Replacing ink cartridges
Your printer uses separate black and color ink cartridges. The ink levels are shown on
the control panel and in the printer software.
CAUTION:
For the best quality prints, store ink cartridges in locations where the
temperature does not exceed 85°F (30°C).
1. Make sure the printer is turned on.
2. Open the printer access door by lifting from the recessed hand-holds on the
sides of the unit.
Menu Options Select
Check Ink Levels OK
Check Paper Levels OK
Nozzle Check OK
Printhead Alignment OK
Clean Printhead OK
Print Test Page OK
Format Memory Card OK
WARNING: Formatting will erase all the data on a memory card.
TIP: A printhead alignment and a check of the inkjet nozzle can also be initiated
from the Home Center software.
Windows : Open the Home Center Help panel by clicking Help on the Home
Center window, as needed. Click Maintenance, and then click Nozzle Check or
Printhead Alignment.
Macintosh : Open Home Center window from the dock, and click Maintenance,
and then click Nozzle Correction or Printhead Alignment.
WARNING: Use genuine Kodak ink cartridges to ensure best results and avoid
printhead damage not covered under warranty. Third-party ink cartridges may
not work with your printer.