Kodak ESP 7 - Manual (Page 39)

www.kodak.com/go/aiosupport 31
KODAK ESP 7 All-in-One Printer
5. Select your printer and click Add .
Wi-Fi to Ethernet
To convert the Wi-Fi connection from a Macintosh to an Ethernet connection,
connect the printer to the network (LAN port on the Router) with an Ethernet cable.
Ethernet to Wi-Fi
To convert the Ethernet connection from a Macintosh to a Wi-Fi connection:
1. Disconnect the Ethernet cable from the printer.
2. Configure the wireless network from the printer front panel. See Configuring a
wireless network connection, page 22 .
3. Press Menu .
4. Press until Network Settings is selected, and then press OK .
5. Select View Network Configuration and confirm you have an IP address.