Kodak ESP 7 - Manual (Page 15)

www.kodak.com/go/aiosupport 7
KODAK ESP 7 All-in-One Printer
NOTE: See Adjusting the control panel position, page 8 for instructions on raising
and lowering the control panel so that it is easier to use.
LCD screen
The LCD screen displays photos, messages, instructions, and menu items. Menu
navigation is accomplished with the 4-way Navigation buttons on the control panel.
The LCD Start-Up screen displays when the printer is ready for operation but is not
performing a task. The screen also displays the current level of black and color ink.
Number Name Description
1 On/Off button Powers the printer ON or OFF.
2 Menu button Displays the menu, and toggles between parameters
screens and preview screens.
3 Screen Displays photos, messages, status, and menus.
4 Attention light Blinks or flashes when an error occurs.
5 Cancel button Cancels the current operation and control panel
navigation, and returns you to the menu.
6 Wireless network status light When lit, signals that a wireless (Wi-Fi) network
connection is active. If the LED is illuminated, you may
not be connected to the network yet. Go to Network
Settings, View Network Configuration, and verify that
it says it is Network and Connected.
Blinks when searching for an available Wi-Fi network
within range, or when the existing signal is too weak to
transmit or receive wireless signals.
7 Ethernet network status light When lit, signals that an Ethernet network connection
is active.
8 Zoom buttons Let you zoom in and out of a photo.
9 4-way navigation buttons Enable you to navigate menus and photos, and pan
around a zoomed photo.
10 OK button Enables you to complete a menu selection or photo
print command, or allows you to continue with the
current operation.
11 Start button Starts the following operations: copy, scan, print, and
transfer.
Color ink level monitor
Black ink level monitor