Audio adjustments, Volume, Bbe system – Aiwa CX-NHMT75 User Manual
Page 9: Super t-bass system
En
ENGLISH
9
SOUND
AUDIO ADJUSTMENTS
VOLUME
Turn VOLUME on the main unit, or press VOL on the
remote control.
The volume level is displayed as a number from 0 to MAX (50).
The volume level is automatically set to 20 when the power is
turned off with the volume level set to 21 or more.
To change the left/right balance
Press MANUAL SELECT on the remote control. “L/R” is displayed
for 4 seconds. Press
r DOWN or t UP on the remote control
within these 4 seconds.
• The DOLBY PRO LOGIC and the DOLBY DIGITAL SURROUND
front speakers level is also changed. (See pages 21 and 29)
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound.
It also enriches the Karaoke function to make your voice sound
clear and pleasant.
Press BBE.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
• The BBE system does not perform while 5.1 CH INPUTs (page 29)
are active.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
• Low frequency sound may be distorted when the T-BASS
system is used for a disc or tape in which low frequency sound
is originally emphasized. In this case, cancel the T-BASS
system.
• When playing back a tape recorded with BBE, it is
recommended that BBE be set to off to avoid distorted high
frequency sound.
PREPARATIONS
SOUND