beautypg.com

Remote control, Connecting an outdoor antenna – Aiwa CX-NHMT75 User Manual

Page 6

background image

6

ENGLISH

To position the antennas
FM feeder antenna:

Extend this antenna horizontally in a T-shape and fix its ends to
the wall.

AM antenna:

Position and rotate this antenna to find the best possible
reception.

To stand the AM antenna on a surface

Fix the claw to the slot.

CONNECTING AN OUTDOOR ANTENNA

For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to FM 75

Ω terminals.

To connect other optional equipment

page 28.

REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.

When to replace the batteries

The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.

Using the remote control

The instructions in this manual refer mainly to the buttons on the
main unit. Buttons on the remote control with the same names
as those on the main unit can be used as well.

c/d PRESET on the remote control

The function is the same as that of

d on the main unit.

• If the remote control is not going to be used for an extended

period of time, remove the batteries to prevent possible
electrolyte leakage.

• The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor inside the display window is exposed to intense light,
such as direct sunlight

- Other remote controls are used nearby (those of a television,

etc.)