Aiwa CX-NHMT75 - Manual (Page 4)

4
ENGLISH
PREPARATIONS
CONNECTIONS
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local voltage.
1 1 1 1 1
Connect the right speaker to the main unit.
Connect the speaker cord with the white stripe to the
SPEAKERS R
0 terminal and the black cord to the 9
terminal.
• Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in SPEAKERS terminals.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
2 2 2 2 2
Connect the left speaker to the main unit.
Connect the speaker cords to the SPEAKERS L terminals
in the same manner as step 1.
3 3 3 3 3
Connect the surround speakers.
Connect the surround speaker cords to SURROUND
SPEAKERS terminals.
4 4 4 4 4
Connect the center speaker.
Connect the center speaker cord to CENTER SPEAKER
terminal.