Kramer Electronics VS-808YC - Manual (Page 6)

Overview
3
3 Overview
The VS-808YC is a true 8x8 matrix switcher for s-Video signals and balanced
stereo audio signals. The high quality VS-808YC lets you simultaneously
route any or all of the 8 inputs to any or all of the 8 outputs.
The
VS-808YC 8x8 s-Video / Audio Matrix Switcher features:
Video bandwidth of 70MHz that ensures transparent performance
Easy-to-connect detachable terminal block connectors for the audio signals
Glitch-free transitions, which are produced when sources share a common
reference sync 1
DC coupled inputs and outputs
Both audio-follow-video and breakaway options
The storing and recalling of 16 setups
A TAKE button for precise switch control
A LOCK button to prevent tampering with the front panel
Control the VS-808YC using the front panel buttons, or remotely via:
RS-232 or RS-485 serial commands transmitted by a touch screen system,
PC, or other serial controller
The Kramer infrared remote control transmitter or infrared remote extension
cable transmitter (optional), see section 4.1
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer VS-808YC
away from moisture, excessive sunlight and dust
4 Your VS-808YC 8x8 s-Video / Audio Matrix Switcher
Figure 1, Table 1 and Table 2 define the VS-808YC 8x8 s-Video / Audio
Matrix Switcher:
1 As it switches during the vertical interval