Kramer Electronics VS-808YC - Manual (Page 23)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-808YC
20
To confirm several actions (in CONFIRM mode), do the following:
1. Press each OUT-IN combination in sequence.
The corresponding digits in the 7-segment Display blink. The TAKE
button also blinks.
2. Press the blinking TAKE button to confirm all the actions.
The corresponding digits in the 7-segment Display no longer blink. The
TAKE button illuminates.
8.5 Storing/Recalling Input/Output Configurations
You can store and recall 1 up to 16 input/output configurations using the 8
input buttons and the 8 output buttons, as Figure 12 illustrates:
Figure 12: Storing and Recalling using the Input / Output Buttons 2
8.5.1 Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button blinks.
2. Press one of the 16 Input / Output buttons (this will be the setup # in
which the current status is stored). If in the CONFIRM mode, press the
blinking TAKE button to confirm the action.
The memory stores the data at that reference.
1 The 16 input/output configurations (or setups) also include the relevant audio-follow-video / breakaway option definition
2 The gray numbers (1 to 16) in Figure 12 that illustrate the corresponding store/recall configuration numbers, are for the
purpose of illustration only and do not appear on the buttons