Kramer Electronics VS-808YC User Manual

Page 25

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Operating the VS-808YC

To unlock the

VS-808YC:

Press the illuminated LOCK button for more than two seconds, until the

LOCK button is no longer illuminated

The front panel unlocks

8.7 Resetting the VS-808YC

You can reset the

VS-808YC unit to the:

Current status

(reloads the current setup

)

Factory default (resets to the pre-installed factory default state)

8.7.1

Resetting to the Current Status

You can reset the

VS-808YC unit to the current status (reloads the current setup).

To reset a

VS-808YC unit to the current status, do the following:

Press INPUT buttons 1, 2 and 3 simultaneously for 3 seconds

The

VS-808YC unit resets to the current status, momentarily displaying

the unit characteristics, as section 8.1 describes

8.7.2

Resetting to the Factory Default State

You can reset the

VS-808YC unit to the factory default state.

To reset a

VS-808YC unit to the factory default state, do the following:

Press OUTPUT buttons 1, 2 and 3 simultaneously for 3 seconds

The

VS-808YC unit resets to its factory default state, momentarily

displaying

the unit characteristics, as section 8.1 describes

1 Sometimes called a “ soft reset”
2 Without having to switch the power off and on
3 In addition, the unit characteristics also appear immediately (and automatically) after switching on the power