Kramer Electronics VS-808YC - Manual (Page 20)

Operating the VS-808YC
17
8 Operating the VS-808YC
You can operate your VS-808YC via:
The front panel buttons
RS-232/RS-485 serial commands transmitted by a touch screen system,
PC, or other serial controller
Infrared remote control transmitter
8.1 Displaying Unit Characteristics
Switching on and/or resetting 1 the VS-808YC unit, momentarily displays the
following characteristics in the front panel 7-segment Display, in three
consecutive cycles, as the example in Figure 11 illustrates:
Figure 11: VS-808YC Unit Characteristics
1 To the Current Status (see section 8.7.1) or to the Factory Default State (see section 8.7.2)