beautypg.com

Kramer Electronics VS-808YC User Manual

Page 14

background image

Connecting the VS-808YC

11

6.2 Controlling via RS-232 (for example, using a PC)

To connect a PC to the

VS-808YC unit, using the Null-modem adapter

provided with the machine (recommended):

Connect the RS-232 9-pin D-sub rear panel port on the Master

VS-808YC

unit to the Null-modem adapter and connect the Null-modem adapter with

a 9-wire flat cable to the RS-232 9-pin D-sub port on your PC

To connect a PC to the

VS-808YC unit, without using a Null-modem adapter:

Connect the RS-232 9-pin D-sub port on your PC to the RS-232 9-pin

D-sub rear panel port on the Master

VS-808YC unit, as Figure 4

illustrates

9-pin D-sub

(From PC)

9-pin D-sub

(Male)

If a shielded cable is used, connect the shield to PIN 5

PIN 4 is connected to PIN 6

PINs 8, 7, 1 are connected together

PIN 5 Connected to PIN 5 (Ground)

PIN 3 Connected to PIN 2

PIN 2 Connected to PIN 3

Figure 4: Connecting a PC without using a Null-modem Adapter