Kramer Electronics VP-88K - Manual (Page 9)

Defining the RGBHV/Balanced Audio Matrix Switcher
5 5
Table 1: VP-88K RGBHV/Balanced Audio Matrix Switcher Front Panel Features
# Feature Function
1 IR Receiver LED Lights yellow LED when receiving signals from the Kramer infra-red
remote control transmitter
2 POWER LED Lights red when the unit is turned on
3 OUTPUT SELECTOR
buttons
Select the output to which the input is switched
4 INPUT SELECTOR buttons Select the input to switch to the output (see Section 7.2
5
)
TAKE button Press to toggle between the Confirm mode 1 and the At Once mode
(see Section 7.3
6
)
INPUT-OUTPUT STATUS
display
Displays the selected input switched to the output (marked above
each input)
7 LOCK button Locks the front panel buttons
8 AUDIO LEVEL + button Press to increase the input or output audio signal level
– button Press to decrease the input or output audio signal level
9 AFV Button When pressed 2
10
, actions relate to the video and audio channels. The
audio channels follow the video channels
AUDIO Button When pressed and the button is lit, subsequent actions relate to
audio functions
11 VIDEO Button When pressed and the button is lit, subsequent actions relate to video
functions
12 RCL Button Recalls a setup from the non-volatile memory. Press the RCL button
followed by an OUTPUT (1-8) or INPUT (9-16) button 3
13 STO Button Stores the current settings in non-volatile memory. Press the STO
button followed by an OUTPUT (1-8) or INPUT (9-16) button 3
14 OFF Button An OFF-OUTPUT combination disconnects that output from the
inputs; an OFF-ALL combination disconnects all the outputs
15 ALL Button Press ALL followed by an INPUT button to connect that input to all
the outputs
1 When in the Confirm mode, the TAKE button lights
2 The button lights
3 In this case the INPUT or OUTPUT button corresponds to the setup address number