Kramer Electronics VP-88K - Manual (Page 25)

Operating the VP-88K
21 21
Figure 15: Status Display During Normal Operation
In the VIDEO mode, the display shows the video signal configuration. In the
AUDIO mode, the display shows the audio signal configuration. In the AFV mode
(see Section 7.5.1
7.4.3 Status Display During Audio Gain Level Setting
), the display shows both signal configurations.
During audio gain level setting, the Status display indicates:
 Whether an INPUT or OUTPUT is selected (in this example, OUTPUT)
 Which channel number is selected (in this example, 3)
 The current gain setting in 0.5dB increments (in this example, -4.5). The
0.5dB is indicated by the period following the 4.
Figure 16: Status Display Showing OUTPUT 3, Gain -4.5
To set the audio gain levels, see Section 7.7
7.5 Choosing the Audio-Follow-Video or Breakaway Option
.
You can configure stereo audio signal switching in one of two ways:
• Audio-follow-video (AFV), in which all operations relate to both the video and
the audio channels (see Section 7.5.1
• Breakaway, in which video and audio channels switch independently (see
)
Section 7.5.2
7.5.1 Setting the Audio-Follow-Video Option
)
To set the Audio-follow-video (AFV) option, press the AFV button. One of the
following occurs:
• If the AUDIO and VIDEO configurations are the same, then the AFV button
lights. The audio follows the video