Kramer Electronics VP-88K - Manual (Page 23)

Operating the VP-88K
19 19
The Confirm Mode
In the Confirm mode:
• You can enter several actions and then confirm them by pressing the TAKE
button to simultaneously activate the multiple switches
• Every action requires user confirmation which protects against erroneous
switching
• Execution is delayed 1
7.3.1 Toggling between At Once and Confirm Modes
until the user confirms the action
To toggle between the At Once and Confirm modes:
1. Press the TAKE button to toggle from the At Once mode 2 to the Confirm
mode 3
2. Press the TAKE button to toggle from the Confirm mode back to the At Once
mode.
Actions no longer require user confirmation and the TAKE button no longer
lights.
.
Actions now require user confirmation and the TAKE button lights.
7.3.2 Confirming a Switching Action
To confirm a switching action (in the Confirm mode):
1. Press an output-input combination.
The corresponding input number that is displayed in the STATUS 7-segment
display flashes. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm the action.
The corresponding input number that is displayed in the STATUS 7-segment
display no longer flashes. The TAKE button lights.
To confirm several actions (in the Confirm mode):
1. Press each OUTPUT-INPUT combination in sequence.
The corresponding input numbers that are displayed in the STATUS
7-segment display flash. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm all the actions.
The corresponding input numbers that are displayed in the STATUS
7-segment display no longer flash. The TAKE button lights.
1 If the TAKE button is not pressed within one minute, the action is aborted
2 The TAKE button does not light
3 The TAKE button lights