Kramer Electronics VP-88K - Manual (Page 13)

Connecting the RGBHV/Balanced Audio Matrix Switcher
9 9
6 Connecting the RGBHV/Balanced Audio Matrix Switcher
To connect the VP-88K RGBHV/Balanced Audio Matrix Switcher 1 (see Figure 3 ):
Figure 3: Connecting the VP-88K RGBHV/Balanced Audio Matrix Switcher
1. Connect up to 8 RGBHV video sources 2 to the BNC INPUT connectors 3
2. Connect up to 8 balanced/unbalanced stereo audio sources to the AUDIO
INPUT terminal block connectors.
.
3. Connect up to 8 RGBHV video acceptors to the BNC OUT connectors 3 .
4. Connect the corresponding balanced stereo audio acceptors 4
1 Switch off the power on each device before connecting it to your VP-88K. After connecting your VP-88K, switch on its power and
then switch on the power on each device
to the AUDIO
OUTPUT terminal blocks.
2 All signal connections using more than one cable to interconnect between the devices should be of equal length
3 5 BNC connectors (RGBHV) per source/acceptor
4 Not illustrated in
Figure 3