Kramer Electronics VP-88K - Manual (Page 24)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-88K
20
7.4 Understanding the 7-Segment Status Display Information
The VP-88K has three display modes:
• Immediately after the power is turned on (see Section 7.4.1
• During normal operation (see
)
Section 7.4.2
• During Audio Gain Level Setting (see
)
Section 7.4.3
7.4.1 Status Display Immediately After Power is Turned On
)
Immediately after the unit is turned on, the status display shows:
1. The firmware version (major, minor, and revision) for the first five seconds
(see Figure 13 )
Figure 13: Status Display Immediately After Turn On
2. The firmware build number and machine number for the following five
seconds (see Figure 14 ).
Figure 14: Status Display 5 Seconds After Turn On
7.4.2 Status Display During Normal Operation
During normal operation, the STATUS display shows which inputs are switched to
which outputs (an example is shown in Figure 15 ).