Kramer Electronics VP-88K - Manual (Page 32)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting to the VP-88K via your Browser
28
9 Connecting to the VP-88K via your Browser
You can remotely operate the VP-88K using a Web browser via the Ethernet
connection (see Section 9.1
To check that Java is installed and running, browse to:
). To be able to do so, you must use a supported Web
browser; Microsoft (V6.0 and higher), Chrome, Firefox (V3.0 and higher).
http://www.java.com/en/download/help/testvm.xml
This page runs a test and displays a Java success (see Figure 24 ) or failure
message.
Figure 24: Java Test Page Success Message
If you do not see the success message, follow the instructions on the page to:
• Load and enable Java
• Enable Javascript in your browser
9.1 Connecting to the VP-88K User Manual via your Browser
Make sure that your PC is connected via a network to the VP-88K and do the
following:
1. Open your Internet browser.
2. Enter the unit’s IP number (for the default IP address, see Figure 25 ) or name
in the Address bar of your browser.
If you are using DHCP, you have to enter the name.
Figure 25: Entering the IP Number in the Address Bar
The Loading page appears.