Hawk Industries Hawkjaw Sr. 100K-2GSR M100K Serial Numbers 141 to 200 - Manual (Page 78)

76 Trouble Shooting
Trouble Shooting Trouble Shooting
The low torque warning poppet pin #061-30064 and
#061-20238 poppet seat may have seal damage or the
bellville springs #061-022S need replacement or
correct placement. See Drawings. To check poppet
seal damage, refer to page 23 for LOW TORQUE
WARNING TEST #1 PROCEDURES.
The low torque warning small “U” cup seal is
leaking. Replace the seal. Make sure the seal is
installed with the top of the “U” facing in. Order
Hawk # 061-LTW-RK. See Drawings. Refer to
LOW TORQUE WARNING TEST #2
PROCEDURES.
The Low torque warning system Test #1
has failed.
The Low torque warning system Test #2
has failed.
Problem Remedy
.